Incident Response and Troubleshooting Pre-Launch Checklist: Item-by-Item Verification

The item most easily skipped among the ten is the "drill record." Emergency procedures never practiced become improvised chaos when an actual incident strikes.

Insights:Incident Response and Troubleshooting Pre-Launch Checklist: Item-by-Item Verification

10-Point Checklist

# Check Item
1 Incident severity matrix defined
2 First responder assigned
3 Monitoring covers sites and resources
4 Alert recipients configured
5 Containment playbook readable on one screen
6 Rollback process verified in practice
7 Contact info locked in group chat
8 Escalation path clearly defined
9 Post-mortem template prepared
10 Drill record exists

Three Key Verifications

Rollback Verification

Actually performed a rollback, not just "theoretically able to." Verify code, configuration, and data.

Alert Verification

Proactively trigger an alert and confirm it can be received, recognized, and traced.

Drill Record

Simulate a "site unreachable" scenario and record elapsed time from detection to recovery.

Only after these three verifications is the process considered usable.

Inspection Method

  • Open each item individually to confirm.
  • Mark uncertain items and set a deadline.
  • Retain screenshots or records for critical items.

Maintenance After Launch

  • Recheck quarterly.
  • Update responders on the day of any staffing change.
  • Configure alerts simultaneously when adding new monitoring items.
  • Common Failures

    • Alerts sent to former employees' email addresses.
    • Runbooks are too long; nobody consults them when issues arise.
    • Only practiced "rebooting," never practiced "data rollback."

    Scope

    This checklist is designed for small to medium-sized sites. For multi-team collaboration or highly regulated environments, add approval and escalation procedures.

    Related Reading: